New Type Din Rail Three Phase Four Wire Electronic Energy Meter

XTM1250SC-U three phase four wire (new type din rail ) electronic energy meter, it adopts micro-electronic techniques measure electric energy: adopts imported large scale integrate circuit, use advanced technique of digital and SMT techniques,it’s a new type Triathlon electronic watt-hour meter.This energy meter completely accords with GB/T71215.321-2008 CNS and three phase active function energy meter relevant techniques requirement of international standard Class.1 ; can accurately and direct measure the energy metering the forward active power, the 8 (6 + 2) LCD display active total electricity consumption, this meter has infrared and RS485 communication interface, optional 645 or MODBUS communication, with anti-theft & installation in any location, etc., it is an ideal energy meter upgrade products. With good reliability, small size, light weight, beautiful appearance, advanced technology, 35mmDIN standard rail mounting features, also has good resistance to electromagnetic interference, low self-consumption of energy-saving, high-precision, high overload, high stability, anti-theft, long life. It’s suitable for measuring rated frequency 50Hz or 60Hz three phase AC active electronic energy. It’s fixed installation in the room, it is suitable for ambient temperature not exceed -25 ~ + 55 ℃, relative humidity less than 95%, and the air not contain corrosive gases and avoid dust, mold, salt spray, condensation, and insects influences.

All lines of energy meter between the shell can withstand 1.2 // 50μs waveform, peak value is 6 for pulse voltage, under different polarity of each successive test 10 times arcing breakdown does not occur. All lines on the meter case externally accessible able to withstand the actual frequency of 50Hz sine wave AC between genus-bit 2KV, which lasted one minute test without breakdown.

The Meter through its RS485 interface to achieve long-distance power and other data copied meter,and through its infrared communication interface with hand held computer close transcribed achieve energy data in the meter .Encoding format, parity, and data transmission in a manner consistent MODBUS-RTU standard. The Ex-factory default baud rate is 9600 ps. (1200bps, 2400bps, 4800bps, 9600bp optional.

his meter uses two types of registers, independent addressing.

The first category is the data register, read, use the command code 0x04 to read.

The second category is the parameter register, read and write, use the command code 0x03 read, write parameters using 0x10.

The energy meter coupled with photoelectric energy pulse test output port,button located on the terminal box, + 5Vdc received on the 17th (positive) terminal, the signal line s can be connected to test equipment on the 18th (negative) terminal

it adopts micro-electronic techniques measure electric energy It’s suitable for measuring rated frequency 50Hz or 60Hz three phase AC active electronic energy. It’s fixed installation in the room, it is suitable for ambient temperature not exceed -25 ~ + 55 ℃, relative humidity less than 95%.

din rail energy meter modbus

din rail mounted energy meter

din rail energy meter

din rail mounted energy meter india

This meter uses two types of registers, independent addressing.

The first category is the data register, read, use the command code 0x04 to read.

The second category is the parameter register, read and write, use the command code 0x03 read, write parameters using 0x10.