XTM1250SD-S din rail energy meter introduction

XTM1250 series DIN rail mounted three-phase electronic watt-hour meter is developed by our company using microelectronics technology and imported large-scale integrated circuit, advanced digital sampling processing technology and SMT technology. It has fully independent intellectual property rights for the new three-phase four-wire active power meter. Its performance fully meets the relevant technical requirements of GB/T17215.321-2008(level 1 and 2 static AC active power meter), it can accurately and directly measure the active power consumption of 50Hz or 60Hz three-phase AC power grid load, the table can choose the meter and LCD display active power. There are far infrared and RS485 communication modules. It has the following characteristics: good reliability, small size, light weight, beautiful appearance, easy installation and so on.

Functions and features:

XTM1250 series energy meter: 35 mm standard rail mount, according to DIN EN50022.

XTM1250 series energy meter: 10 pole width (modulus 12.5 mm), in line with DIN43880 standard.

XTM1250 series energy meter: Standard configuration 5+1 meter and 6+1 LCD display (999999.1 KWH) display.

XTM1250 series energy meter: Standard configuration passive energy pulse output (polarity), easy to connect with various AMR systems, in accordance with IEC 62053-21 and DIN43864 standards.

XTM1250 series energy meter: You can choose far infrared data communication port and RS485 data communication port, communication protocol conforms to the standard DL/T645-1997,2007 and MODBUS-RTU protocol.

XTM1250 series energy meter: 4 rates, 12 days can be set, the date of the monthly automatic reading meter can be set arbitrarily, you can choose a single rate function of the week off day.

XTM1250 series energy meter: Built-in clock and maintenance-free lithium battery. The battery capacity can be detected and displayed in real time, and 12 months of battery data can be stored. Data can be saved after power failure.

XTM1250 series energy meter: Automatically detects the flow direction of the load current and indicates it.

XTM1250 series energy meter: Measurement of three-phase four-wire active power consumption in a single direction. It is independent of the flow direction of the load current. Its performance fully complies with GB/T17215.321-2008 standards.

XTM1250 series energy meter: 5 LED indicators indicate power status (A,B,C) and power pulse signal (red) and reverse.

XTM1250 series energy meter: direct connection, standard configuration S-type wiring.

XTM1250 series watt-hour meter: Short transparent protective cover reduces installation space and facilitates centralized installation.