DIN Rail Single Phase 2 Wire Electronic Energy Meter

The DIN rail single phase electronic energy meter is a kind of new style single phase whole electronic type meter, and adopt up to date micro-electronics technique and imported special large scale integrate circuit, use advanced technique of digital sampling technique and SMT technics etc. The meters are completely conformed to the relative requirements of the National Standard GB/T17215.321-2008 and International Standard IEC62053-21 on the meter (Class 1 or Class 2). The meter is used for measuring active energy power consumption in a rated frequency of 50Hz or 60Hz three phase alternating current circuit. It can accurately and directly measure active energy consumption from positive and reverse directions. It has following features: Good reliability, small volume, light weight, specious nice appearance, advanced technics. The meter is installed indoors. The site conditions shall be assumed as follows: The ambient temperature is -25 ~ +55℃, relative humidity is not more than 95%. There isn’t heavy corrosive gas or any influence of dust, mold and insects etc

Mail Technical Data

1. 35mm DIN standard rail installation, in accordance with DIN EN50022 standard;

2. 2 pole width (modulus 35mm), in line with DIN43880 standard;

3. Standard configuration passive energy pulse output (with polarity), optional passive teledynamic energy pulse output (no polarity), easy to connect with various AMR systems, in accordance with IEC62053-31 and DIN43864;

4. support four rates of peak, peak, flat, valley, built-in two sets of time zone tables, two-day timetable, support public holiday settings, can be configured on demand;

5. The measurement of the most need, and the instantaneous voltage, current, power factor, frequency, active power, reactive power, apparent power, etc.;

6. Built-in current sensor, two-way measurement of single-phase two-wire active power consumption, measurement accuracy can reach 0.5S;

7. With a way RS485 or M-BUS communication port to achieve remote collection function;

8. Compatible with a variety of communication protocols, including DL/T645-1997, DL/T645-2007, MODBUS-RTU, IEC62056-21C Mode.

220v Output Voltage ，The Operating Temperature is - 25 ~+55.with 50HZ/60HZ Frequency Standard is IEC62053-21 . Dimensions is 78*66*36mm

It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net.