LCD Display Type 3 phase 4 wire energy meter din rail meter

This Meter is a kind of new style three phase four wire active energy meter.It adopts micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc.

35 mm standard DIN Rail installation, complying with standard DIN EN50022.

Ten pole width (Modulus 12.5mm) ,complying with standard JB/T7121-1993.

Seven digits display LCD, standard configuration 6+1 digits display(999999.1kWh)

.Standard configuration one port of pulse output passive (polarity), may select a distant port of pulse

output passive(nonpolarity)

Four LED instructioins respectively every power supply state and signal of energy implse

The meter type according to the national standard GB / T17215.321-2008 "1 and 2 static AC active watt-hour meter", the international IEC62053-21 design, the use of advanced ultra-low power LSI technology and SMT manufacturing process Of the high-tech products, the key components use international renowned brands of long-life devices, improve product reliability and longevity.

Product circuit measurement part of a dedicated measurement chip, high reliability, high precision and accurate measurement of active energy. The product adopts the linear power supply, the metering chip converts the electric energy into pulse respectively. The microprocessor completes the functions of power collection, power calculation, power pulse output and LCD display processing. The data security adopts redundant design, and the data adopts multiple backup to ensure reliable measurement data.

We can supply a wide range of products suitable for 100VAC to 380VAC (50 or 60Hz). In addition to our regular power meters, we have developed our own prepaid smart card form, prepaid smart track card form, rechargeable smart card. As well as a complete set of PC-based pre-paid management operating system. For more information, please contact us.This product warranty period of 18 months, man-made damage will not be included in the scope of warranty.

The meter connection should be selected in accordance with the overload current device in the circuit, the performance of the circuit-breaker, and the relevant local codes.

In the selection of external air switches or circuit breakers, should be in accordance with local. standards and the current construction of the electricity design, and should be outside the air switch or circuit breaker installed in the meter line, use it as a meter power equipment , and pay attention to the place near the meter in order to facilitate the operation.

In the choice of external fuses, fuses as overload protection devices, should be in accordance with local standards and the current construction of the power design, and should be external fuse, fuse in the table into the table line used as a broken meter Electrical equipment, and pay attention to the place near the meter in order to facilitate the operation.

The meter can be installed either directly in the indoor or waterproof case can be installed in the outdoors.

The specific situation according to the relevant local standards

Please install a padlock or similar device to prevent stealing

This watch must be installed on a fireproof wall.

This watch must be installed in a ventilated and dry place.

Be sure to place the watch in a protective case when it is necessary to install the meter in a location that is dusty or dangerous. The Meter must be tested, stamped and affixed with a qualified sign before installation place this watch in a convenient location for reading

When the meter installed in the interference of many places, such as multi-mined areas, welding machines, converters, please install anti-jamming device

After the installation is complete, please close the meter to prevent stealing

Please follow the wiring diagram below to connect the meter circuit

This product is available in two wiring options (please note that you purchase the instrument wiring type)

Wiring Diagram(Direct Access)

with 0.01 Accuracy Class110-240V Output Voltage100X76mm Dimensions which Operating Temperature is -20℃~+70℃ It adopts micro-electronics technique, and imported large scale integrate circuit,

Modbusthree phase four wire din-rail energy meter

The instrument can only be used in the specific areas specified in this manual and catalog, and can only be connected to devices or components recommended or approved by the company.